Pressure PF100-P
Position PF100-M

  Fully stand alone
  Powerful and Easy to use
  Several ranges available.
  Weatherproof IP67 case
  Rechargeable 3V lithium battery
  Run your own software
  Internal date & time
  Software for Windows, programmable by Linux, Palm™ & other OS
  USB / RS232 download

• Monitoring of fluid pressure (pumps, level of tanks and wells)
• Monitoring of slow movements (cracks)

• PF100 is a new concept in pressure and position data logging,
  no more permanent cables neither central monitoring system.
  Data will be downloaded when necessary from the sensor by the user friendly software.
  If a special event or condition requires to be monitored in detail then PF100
  can run its own internal software.

• USB / RS232 cables for PC connection.
• Battery charger.
• External buzzer.
• 
  Accessories are sold separately

• Several ranges spacing from 0-100 kPA to 0-140 mPA (pressure models -P)
• AD converter: 10 bit 0.1% FS resolution
• Hydraulic connections 1/4" BSP (pressure models -P)
• Stroke 10 mm (position model -M)
• Sampling interval: programmable from 1 to 16777216 seconds.
• Sampling can be also triggered by an external source.
• Internal date and time in DOS format.
• Power supply: 3V lithium battery (or external)
• Serial port for PC downloading: (buffered cable is required).
• Programmable if special monitoring is required.
• Memory: 7420 memory points that can be doubled using a software procedure.
• 12 internal registers for storing further data.
• Temperature Range -40°C +85°C.
• More than 50 powerful commands including memory unerase.